Flash cut : Edges of the banner will be cut straight according to the size selected
Hem Edges: Created by folding 1" of banner over to the back and then welding the 2 layers together.
Pole Pockets: Created by folding and sealing approx 3" extra material outside the actual banner size towards the back of the banner, thus creating a pocket-sleeve where a pole or a rod can slide into.
Adhesive Grommets: Made of a high strength composite film. Stronger than metal grommets. More effective visual effect as they blend into the banner.
Metal Grommets: Made from Heavy Duty Brass. They are set in place onto a punched hole creating a secure and strong edge.
Velcro material with two sided tape for easy installation
Wind flaps are half cut circles on the banner. They allow the wind to pass through the banner without damaging it. Recommend for high wind areas
Zip ties are generally used to install banners on the wire fence.
Bungees are elastic cords with metal hooks at both ends.
Nylon rope is another common way of installing outdoor banners.
Skyhooks work outdoors or indoors to attach banners, coroplast or posters to any glass or non-porous surface.
Can hang banners without putting grommet holes on it.
Pole brackets are made out of heavy metal and are strong to withstand moderate winds.Maximum width of banner is 30" for banner pole brackets.
Hardware for hanging banner on wall.Maximum width of banner is 30" for banner wall brackets.
Follow us on
: Ahmedabad-380014 : email@example.com : +919724000654 : 1800 103 0313